Chapter 5 Parameters_VFD-B Series
5-76
Revision 10/2005, BE13, SW V4.08
06 - 08
Present Fault Record
06 - 09
Second Most Recent Fault Record
06 - 10
Third Most Recent Fault Record
06 - 11
Fourth Recent Fault Record
Factory Setting: 00
Readings 00 No fault
01 Over-current (oc)
02 Over-voltage (ov)
03 Overheat (oH)
04 Overload (oL)
05 Overload1 (oL1)
06 External fault (EF)
07 IGBT protection (occ)
08 CPU failure (cF3)
09 Hardware protection failure (HPF)
10 Current exceeds 2 times rated current during accel.(ocA)
11 Current exceeds 2 times rated current during decel.(ocd)
12 Current exceeds 2 times rated current during steady state operation (ocn)
13 Ground fault (GFF)
14 Reserved
15 CPU READ failure (CF1)
16 CPU WRITE failure (CF2)
17 Reserved
18 Motor over load (oL2)
19 Auto accel/decel failure (CFA)
20 Software/password protection (codE)
21 Emergency stop (EF1)
22 Phase-Loss (PHL)
23 Preliminary count value attained, EF active (cEF)
24 Under-current (Lc)
25 Analog feedback signal error (AnLEr)
26 PG feedback signal error (PGErr)
To Next Page
Loading...
Need help?
General