Setting Name Explanation
Horizontal orientation This setting is intended to change the label's horizontal orientation
after the print group has been correctly setup, see Print Group
Setup on page 65.
Rotate the label by 180°.
Vertical orientation This setting is intended to change the label's vertical orientation
after the print group has been correctly setup, see Print Group
Setup on page 65.
Flip the label on the vertical axis.
Horizontal resolution (dpi) Adjust resolution to required DPI (Dots Per Inch)
(60/75/100/150/200/250/300/450/600 DPI).
Vertical resolution (dpi) Select one row of nozzles (300 DPI), both rows of nozzles
(600 DPI) or alternate nozzle rows (300 DPI) It is recommended to
use the 300 - alternate setting when printing at 300 DPI, to reduce
nozzle wear and improve quality at high speed.
Ink saving Set the ink saving mode. Higher values consume less ink but also
reduce the print contrast.
O
25%
50%
75%
End of procedure.
INSTALLATION
103 EPT053091 - Issue 5 - 07 May 2021
To Next Page
Loading...
Need help?
General
