Domino Gx-Series User Manual

Setting Name Description
Intensity of micro purge
(dots)
Set the intensity of the micro purge.
Reset default values Reset to the default micro purge settings.
End of procedure.
Enable Intelligent Mode
Intelligent purge will purge the ink cartridge nozzles whenever a user defined trigger occurs.
To enable intelligent micro purge:
1. Select Home > Ink settings > Micro purge.
2.
Select a Print head tab, to choose which print head to setup.
3.
Select the Purge mode drop down setting and select Intelligent.
4. The settings listed in the table below can now be defined:
Setting Name Description
Input for intelligent micro
purge
Set the input that will trigger a micro purge:
• Product Detect / Print Enable
•
Digital Input
• Encoder
Time between 2 columns
(%)
Set the delay for the purge between each row of nozzles in the
print head.
Type of micro purge Set the type of micro purge:
One Shot
Fog printing
Interpolation steps Define the intensity of purging dependant on the time elapsed
since the last print.
For example, if the printing frequency is high, a small purge before
printing may be required. If the printing frequency becomes slower,
a higher intensity purge can be defined.
End of procedure.
Disable Micro Purge
To disable micro purge:
1.
Select Home > Ink settings > Micro purge.
2.
Select the print head to setup.
3.
Select the Purge mode drop down setting and select O.
End of procedure.
INSTALLATION
87 EPT053091 - Issue 5 - 07 May 2021

Domino Gx-Series Specifications

General

Brand	Domino
Model	Gx-Series
Category	Controller
Language	English