3. Use a new/clean lint-free cloth to wipe the ink cartridge nozzles at a 45° angle.
Note The 45° angle stops debris from one nozzle contaminating the next nozzle.
CAUTION Risk of damage to the ink cartridge nozzles.
Do not use an ethanol wipe or any other chemical to clean the ink cartridge
nozzles. Use a new/clean lint-free cloth.
4.
Insert the ink cartridge into the print head.
CAUTION Fragile electrical contacts. Risk of damage to the ink cartridge and print
head.
Be careful when inserting the ink cartridge. Forcing the cartridge against
the electrical contacts can break the contacts on the print head circuit
board.
End of procedure.
SOFTWARE BACKUP, RESTORE AND UPGRADE
Backup
To backup the labels, service files or both:
1.
Ensure the print groups are not printing. If the print groups are printing, select Stop > All
print groups > Stop.
2.
Insert a USB memory device into one of the controller's USB sockets.
Note
FAT32
MAINTENANCE & TROUBLESHOOTING
189 EPT053091 - Issue 5 - 07 May 2021