Domino Gx-Series User Manual

To set a print time counter increment:
1. Select Home > Setup > Global Print Settings > Counter settings.
2.
Select a counter name.
Note Counter elements that are assigned this name will use these settings.
3.
Select Increment type and select one of the settings listed below:
Setting Name Explanation
Print Time Hours Set the counter to increment in hours.
Print Time Minutes Set the counter to increment in minutes.
Print Time Seconds Set the counter to increment in seconds.
4.
The settings listed below can now be adjusted:
Setting Name Explanation
Start value mode Define the counter's start value mode.
Current time: Start counting at midnight using the
controller's internal clock.
Constant value: Start counting at the time the label is loaded
to the print group.
Start value
Note Visible when "Start value mode" is set to "Constant
value".
Define the counter start value. For example, if set to 5, the counter
will start at 5.
End value mode Define the counter's end value mode.
Time period: End the counter after a user specified number
of hours from midnight has passed.
Constant value: End the counter when it reaches a user
specified value.
End value
Note Visible when "End value mode" is set to "Constant
value".
Define the counter end value. For example, if set to 99, the counter
will end when it reaches 99.
Time period
Note Visible when "End value mode" is set to "Time
period".
Define the number of hours between counter start (midnight) and
counter end.
Divider for counter input Define how the counter increment is divided.
For example, to increment the counter once every 15 minutes:
Set the Increment type to Print Time Minutes.
Set Divider for counter input to 15.
End of procedure.
OPERATION
EPT053091 - Issue 5 - 07 May 2021 164

Domino Gx-Series Specifications

General

Brand	Domino
Model	Gx-Series
Category	Controller
Language	English