DE08TS Diesel Engines Major Maintenance
Oil filter
1. Check for oil pressure and oil leaks, and repair or
replace the oil filter if necessary.
2. Change the oil filter cartridge simultaneously at
every replacement of engine oil.
Fuel filter
1. Drain water in cartridge with loosening the cock
under filter manually (6) from time to time.
Valve clearance adjust procedure
1. After letting the #1 cylinder’s piston come at the
compression top dead center by turning the crank-
shaft, adjust the valve clearances.
2. Loosen the lock nuts of rocker arm adjusting
screws and push the feeler gauge of specified
value between a rocker arm and a valve stem and
adjust the clearance with adjusting screw respec-
tively and then tighten with the lock nut.
3. As for the valve clearance, adjust it when in cold, as
follows.
EA9O2005
Oil filter head
Oil filter
(Cartridge)
15
Model Intake Valve Exhaust Valve
DE08TS 0.3 mm 0.3 mm
To Next Page
Loading...
Need help?
General
