DE08TS Diesel Engines General Information
Engine Specifications
Specification
6
Engine Model
DE08TS
Items
Engine type
Combustion chamber type Direct injection type
Cylinder liner type Replaceable dry liner
Timing gear system Gear driven type
No. of piston ring Compression ring 2, oil ring 1
No. of cylinder-bore
B
stroke (mm) 6 - 111
B
139
Total piston displacement (cc) 8,071
Compression ratio 19.5 : 1
Engine dimension (length B width B height)
(mm)
1,166 B 727 B 1,159
Engine weight (kg) 800
Rotating direction (viewed from flywheel) Counter clockwise
Fuel injection order 1 - 5 - 3 - 6 - 2 - 4
Fuel injection timing (B.T.D.C static) 9°
Injection pump type
Bosch in-line
“AD” Type
Governor type
Mechanical governor pe (RSV)
Injection nozzle type Multi-hole type
(8 hole)
Fuel injection pressure (kg/cm
2
) 180 / 280
Compression pressure (kg/cm
2
) 28 (at 200 rpm)
Intake and exhaust valve clearance (at cold) (mm)
0.3
Intake valve
Open at 16° (B.T.D.C)
Close at 36° (A.B.D.C)
Exhaust valve
Open at 46° (B.B.D.C)
Close at 14° (A.T.D.C)
Lubrication method Full forced pressure feed type
Oil pump type Gear type driven by crankshaft
Oil filter type Cartridge type
Lubricating oil capacity (max. / min.) (lit) 16 / 13
Oil cooler type Water cooled
Water pump Centrifugal type driven by belt
Cooling Method Fresh water forced circulation
Cooling water capacity (engine only) (lit) 14
Thermostat type Wax pallet type (71 ~ 85°C)
4 cycle in-line,
Water-cooled type
Turbo charged
To Next Page
Loading...
Need help?
General
