Doosan DE08TS User Manual

DE08TS Diesel Engines Maintenance
Vibration damper
1. Insert the vibration damper to the crankshaft, and
assemble by tightening the assembling bolts at the
specified tightening torque according to bolt tight-
ening order. (refer to right figure.)
Oil pan
1. Remove the gaskets thoroughly that project at the
timing gear case, case cover of cylinder block, and
the contacting part of flywheel housing by means
of a scraper.
Be careful for the gasket pieces not fall into the
engine during the work.
2. Coat the silicone at the gasket part that was
removed (Contacting part), and attach the new oil
pan gasket.
3. Assemble the oil pan by tightening the oil pan
assembling bolts, and when tightening bolts, pri-
marily tighten the bolts (4ea) at the both ends, and
then tighten the rest bolts to specified torque.
Align the bolt holes with gasket holes to prevent
damage to the gasket and tighten.
Oil filter
1. Install the oil filter onto the cylinder block, and
tighten the fixing bolts.
2. Apply engine oil to the oil filter cartridge o-ring and
assemble the cartridge using a filter wrench.
EA9M3006
WARNING
EAMD034I
WARNING
1
2
4 3
6 7
8 5
EDM2089I
59
Torque 13 kg
•
m
Torque 2.2 kg
•
m
Torque 2.2 kg
•
m

Doosan DE08TS Specifications

General

Brand	Doosan
Model	DE08TS
Category	Engine
Language	English