DE08TS Diesel Engines Maintenance
MAINTENANCE
Engine Disassembly
Heed at disassembly
1. Before disassembly, the part shelf should be pre-
pared for various tools and repair parts.
2. When assembling, clean empty hand should be
used and clean environment maintained.
3. In case of storing the disassembled parts, each
part should not touch each other.
4. In case of disassembly, the parts should be laid in
order.
Oil level gauge
1. Pull out the oil level gauge.
Engine oil
1. Remove the oil drain plug of oil pan and pour the
engine oil into the prepared vessel.
Cooling fan
1. Remove the flange fixing bolts, then take off the
flange and cooling fan.
Belt
1. Loosen the tension adjusting bolts of the alternator
and the idle pulley, and take off the belts.
Thermostat
1. Loosen the rubber hose connected to the cooling
water pipe and remove the thermostat.
2. Remove the rubber hose of the by-pass line.
EB5M3003
EA9M3001
EB5M3002
27
To Next Page
Loading...
