Page 5
614-09354-01_EN
ENGLISH
1. Introduction
Thank you for selecting an EATON product to protect your electrical equipment.
The ModularEasy range has been designed with the utmost care.
We recommend that you take the time to read this manual to take full advantage of the many features
of your ModularEasy.
BeforeinstallingyourModularEasywithyourUPS,pleasereadrstthesafetyinstructions.
Then follow the indications in this manual, which completes the UPS Installation and User Manual.
To discover the entire range of EATON products, we invite you to visit our web site at
www.eaton.com/powerquality or contact your EATON representative.
1.1 Environmental protection
EATON has implemented an environmental-protection policy.
Products are developed according to an eco-design approach.
Substances
This product does not contain CFCs, HCFCs or asbestos.
Packing
To improve waste treatment and facilitate recycling, separate the various packing components.
• The cardboard we use comprises over 50% of recycled cardboard.
• Sacks and bags are made of polyethylene.
• Packingmaterialsarerecyclableandbeartheappropriateidenticationsymbol
Materials Abbreviations
Number in
the symbols
Polyethylene terephthalat PET 01
High-density polyethylene HDPE 02
Polyvinyl chloride PVC 03
Low-density polyethylene LDPE 04
Polypropylene PP 05
Polystyrene PS 06
Follow all local regulations for the disposal of packing materials.
End of life
EATON will process products at the end of their service life in compliance with local regulations.
EATON works with companies in charge of collecting and eliminating our products at the end of their
service life.
Product
The product is made up of recyclable materials.
Dismantling and destruction must take place in compliance with all local regulations concerning waste.
At the end of its service life, the product must be transported to a processing center for electrical and
electronic waste.
To Next Page
Loading...
Need help?
General
