Eaton i-onG2SM User Manual

Introduction
Page 8
The i-on Web Browser Interface Setup Guide explains how to configure
and use the system using the web interface.
Virtual Keypad
The virtual keypad (Figure 2) allows you to perform similar functions as
available at a hardware keypad, including operation of user-defined outputs
using the ABCD keys. The navigation and ABCD keys reflect the status of
the system in the same way as for a hardware keypad.
Figure 2 - Virtual Keypad
For installer and master users, the virtual keypad is access through a
Virtual Keypad option in the web interface. For other users, the web
interface is displayed directly after entering their user code and personal
remote password in the login page of the web interface.
If a master user creates a new user and defines a remote password, it
gives permission for the new user to access the virtual keypad. The new
user can change the password using User Menu – Users – Edit User (if
available to the user).
The virtual keypad can also be accessed through Eaton SecureConnect, as
described in the SecureConnect Installer’s Guide.

Eaton i-onG2SM Specifications

General

Brand	Eaton
Model	i-onG2SM
Category	Security System
Language	English