User Menu Options
Page 47
The keypad gives a double-beep confirmation tone and you will see
the results of the test:
The bottom line shows the name of the user the proximity tag is
allocated to (or "Unknown" if the proximity tag is not recognised).
3. Repeat step 2 for the other proximity tags.
4. Press to end the test.
Testing ARC reporting
The Test – ARC Reporting option is available if the control unit uses a GSM
or PSTN module to communicate alarms to an Alarms Receiving Centre
(ARC).
Master and admin users can use Test – ARC Reporting to test the
connection to the ARC.
To carry out the test:
1. Select Test – ARC Reporting.
The following is displayed:
2. Use or to choose one of the two recipients selected by the
installer. Each recipient uses a separate telephone number to the
ARC. Depending on how the installer has configured
communications, the second line may be used if the first fails to
connect.
3. Press to start the test.
The keypad shows the progress of the call. Check with the ARC that
the test call arrived. If the call fails, the display shows “Call failed”,
followed by the reason.
To Next Page
Loading...
Need help?
General
