USER GUIDE
INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
4
USER GUIDE
INTRODUCTION
DISCLAIMER OF LIABILITY
THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN
RISK.
Do not use this product until you have carefully read the following agreement.
This sets forth the terms and conditions for the use of this product. THE IN-
STALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS
READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS ITS
TERMS AND CONDITIONS.
DISCLAIMER OF LIABILITY
Edge Products, LLC, MSDP Inc., and their successors, distributors, jobbers,
and dealers (hereafter SELLER) shall in no way be responsible for damage
resulting from incorrect use of this product. The BUYER/USER assumes all
responsibility for any damage resulting from the use or misuse of this product.
THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS.
The BUYER acknowledges that he/she is not relying on the SELLER’s skill or
judgment to select or furnish goods suitable for any particular purpose and that
there are no liabilities which extend beyond the description on the face hereof
and the BUYER hereby waives all remedies or liabilities, expressed or implied,
arising by law or otherwise, (including without any obligations of the SELLER
with respect to tness, merchantability and consequential damages) or whether
or not occasioned by the SELLER’s negligence.
The SELLER disclaims any warranty and expressly disclaims any liability for
personal injury or damages. The BUYER acknowledges and agrees that the dis-
claimer of any liability for personal injury is a material term for this agreement
and the BUYER agrees to indemnify the SELLER and to hold the SELLER
harmless from any claim related to the item of the equipment purchased. Under
no circumstances will the SELLER be liable for any damages or expenses by
reason of use or sale of any such equipment.
The SELLER assumes no liability regarding the improper installation or misap-
plication of its products.
It is the installer’s responsibility to check for proper installation and if in doubt,
contact the manufacturer.