INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
INTERNET UPDATES
50
USER GUIDE
Fusion Update Software
REQUIRES INTERNET CONNECTION
Fusion Software allows the user to update their device to the latest
version of rmware and calibration les. This software is included
on the disc provided with your device. It can also be downloaded for
free from Edge Products web site at www.edgeproducts.com , or the
CD can be requested by calling 888-360-EDGE (3343).
Note: Be sure to install both the SOFTWARE and the DRIVERS that come included
in the download or on the disk before you connect your device to your PC. During
the installation you will be prompted to install the drivers, choose yes.
For step by step installation instructions please copy this link into your web
browser http://www.edgeproducts.com/product_images/product_update-
le-11.pdf
Once you’ve installed Fusion, click on the Fusion icon on your PC
desktop. You may be prompted for a Fusion login. If you have not
yet created an account, click on “Create a New User” and you will be
directed to a webpage to create your login information. After enter-
ing your information, a password will be sent to the email address
you provide. Be sure your email account doesn’t block emails from
“edgeproducts.com”. Upon receiving the password, enter your email
address and password on the login screen.
You’ll be prompted to connect the device to launch. After
connect¬ing the device, you’ll see the following screen, click yes to
continue with the update.
NOTE: Be sure to return your vehicle
to stock before connecting the
device to Fusion.
NOTE: If the USB con-
nector you received
has 2 plugs, it is recom-
mended that you plug
both USB connectors
into the computer
before connecting the
device to the other end
to ensure proper opera-
tion.
To Next Page
Loading...
Need help?
General