INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
USER GUIDE
52
INTERNET UPDATES
Update Required
Fusion is designed to help the development team at Edge Products
support new vehicle calibrations.
When you connect your device to the vehicle, the rst step it takes
is identifying your vehicle’s stock le. If the stock le isn’t currently
supported the device will display a screen alerting you that the stock
le is not yet supported, and prompt you to press a button/touch the
screen in order to read and save the stock le. Once the device has
saved the stock calibration, it will prompt you to connect the device
to Fusion. Fusion will ask you if you want to upload your vehicle’s
stock les to our server. Choosing yes will upload the les to the
server, and alert the development team. This will help the devel-
opment team at Edge Products provide support for your vehicle’s
calibration as quickly as possible.
During programming, the device will read the stock le on your
vehicle and compare it to a corresponding stock le that has been
veried by Edge Products. If there is a mismatch the device will alert
you, and display this message:
“ Non-stock condition detected. This is most likely because your vehicle has
been programmed with a competitive product. It is recommended that you
return your vehicle to a stock condition with the product that changed it.
Alternatively, you can plug your device into the internet update system and it
will load the necessary les onto your device to return your vehicle to stock.”
If you don’t have the competitive product that programmed your
truck, connect the device to Fusion where you’ll be prompted to
download the correct stock les. Once downloaded, simply connect
the device to your vehicle, and the device will program the veried
stock les to your vehicle.
Non-Stock condition
Possible Programming Errors
To Next Page
Loading...
Need help?
General