OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN
EN | 02-2015 DOC.N
O
: ST09184-02 19
13. OPERATING INSTRUCTIONS
BOILING
BOILING/HOT KEEP
BOILING/COOLING
COOLING
• PressDecreasevalue . The cursor moves
down.
or
• press Increase value and the cursor
moves up.
13.3 BOILING
• Conrm the selected option by pressing Menu
forwards once. The following options appear
in the display:
MANUAL FILLING
WATER
XXXL
1. Press Increase value once to start the
filling of the water. The amount of water, that is
filled into the pan, can be read in the display (if
the flow sensor option has been selected).
• Press Decrease value or STOP once to
stop the filling of the water.
• Press Decrease value for 5 seconds to set
the value to zero (if the flow sensor option has
been selected).
If Menu forwards is activated before the water
filling is stopped, press STOP to stop the filling.
BOILING
SET TEMPERATURE
XXX°C
2. Press Increase value to increase the
temperature (max 121°C) or press Decrease
value to decrease the temperature (min
30°C).
• Conrm by pressing Menu forwards once.
The following options appear in the display:
BOILING
SET TIME
-h --min
3. Press Increase value to set the required
boiling time (max 7h and 59 min) or shorten the
time by pressing Decrease value .
rpm = revolutions per minute
13.1 Instant start BOILING (Fig.3)
• PressOn/Off for 1.5 seconds. Display lights.
The following text appears in the display:
MENU SETTINGS
I I
I I
V V
The pan is to be in working position. (See Tilting/
Tilt return).
• Press START . Red LED lights with a fixed
light.
The following text appears in the display:
BOILING
-h --min XXX°C
WATER 000+000
AGITATOR 000rpm
The pan starts and the pan temperature automatic-
ally rises to 100°C.
For use of agitator (See Agitator).
13.2 Programmed start
Settings
If you do not want to go through all the steps, you
can press START at anytime in the programming
to start the process.
• PressOn/Off for 1.5 seconds. Display lights.
The following text appears in the display:
The arrow points to the associated function button.
MENU SETTINGS
I I
I I
V V
• Press Menu forwards once. The status of the
pan appears in the display:
BOILING
-h --min XXX°C
WATER XXX+XXX
AGITATOR 000rpm
• Press Menu forwards once. The following
options can appear in the display (depending on
the options selected):