OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN
26
DOC.N
O
: ST09184-02 EN | 02-2015
14.2.2 WHIP
The fixed program WHIP is used to whip more
lighter products such as cream. A whip implement
can be used with good results*.
• Press Increase speed until WHIP appears in
the display:
PRESET AG.PROGR
WHIP
• PressAgitatorstart .
• Press Increase speed and the stirrer starts
at the lowest speed of 25 rpm. (Max speed 200
rpm).
• Press Decrease speed to decrease the
speed.
• PressAgitatorstop to stop the program.
* Available as accessory
14.2.3 Programming of own
agitator program
• Press Increase speed once.
The following text appears in the display:
ADJ AGITATOR PROGRAM 1
NAME
SPD TIME R PAUSE
XXX XX:XX X XX:XX 1
The text that can be changed flashes. (See Name
agitator program).
• Press Menu forwards once.
The following text flashes in the display:
SPD TIME R PAUSE
XXX XX:XX X XX:XX
• PressIncreasevalue to add a higher speed
(max 100 rpm) or press Decrease value to
lower the speed (min 25 rpm.).
• Conrm by pressing Menu forwards once.
The following text flashes in the display:
SPD TIME R PAUSE
XXX XX:XX X XX:XX 1
The total time the agitator is to run is programmed
here. Specified in minutes and seconds
If ” --:--” appears, this means unlimited time.
• Press Increase value to extend the time or
press Decrease value to shorten the time.
• Conrm by pressing Menu forwards once.
The following text flashes in the display:
SPD TIME R
XXX XX:XX N 1
The letter R means Reverse, which means that the
agitator goes in reverse function and pause.
There are two options to select:
N stands for No which means that the agitator only
runsclockwise … or
Y stands for Yes which means that the agitator runs
in reverse.
• Conrm by pressing Menu forwards once.
The figure 1 in the display changes to 2.
SPD TIME R
XXX XX:XX N 2
… or
To Next Page
Loading...
Need help?
General
