Emerson QuickPanel+ IC755C S12CD Series User Manual

Quick Panel Operator User Manual Appendix C
GFK-2847AA Jan 2023
Serial Port Details IC755CxS10CDx, IC755CxS12CDA, IC755CxS15CDx 104
Appendix C Serial Port Details
IC755CxS10CDx,
IC755CxS12CDA, and
IC755CxS15CDx
Adhere to the following guidelines:
• A terminal block is supplied.
• The mating terminal block supports stranded 30 to 14 AWG (0.05 to
2.00 mm2) wires.
• At a minimum, the cable must be rated for 75°C (167°F), or more.
• Secure the serial cable to the mating connector while noting signal
orientation and tighten the screw clamps.
• The torque for the attaching screws is 0.3 Nm (2.66 in-lb.).
Interface: x1 RS–232, x1 RS-232/485 (default is RS-485)
Connectors: Euro Terminal (Tyco Electronics 1-284539-0)
Mating Connector: (Tyco Electronics 1-284510-0)
Pin #
Signal Name
Pin-Out
COM1 (RS-232)
Figure 107: Serial Port Pinouts
IC755CxS10CDx, IC755CxS12CDA and
IC755CxS15CDx
1
TXD
2
RXD
3
RTS
4
CTS
5
SGND
COM2 (RS-232/RS-485
5
)
1
TXD/TXD
+
/DATA
+
2
RXD/TXD-/DATA-
3
RTS/RXD
+
/DATA
+
4
CTS/RXD-/DATA-
5
SG
5
In RS-485 mode, pins 1-3 are interconnected and pins 2-4 are interconnected.

Emerson QuickPanel+ IC755C S12CD Series Specifications

General

Brand	Emerson
Model	QuickPanel+ IC755C S12CD Series
Category	Monitor
Language	English