Emerson QuickPanel+ IC755C S12CD Series User Manual

Quick Panel Operator User Manual Section 5
GFK-2847AA Jan 2023
Mounting and Installation 60
5. Tighten the screws on the mounting bracket in a clockwise
direction.
Figure 61: Tighten Screws
Torque Range for Mounting Clamp Screws
Display Unit
Torque Range
IC755CxS06RDx
0.3 Nm (2.66 in-lb.)
IC755CxW07CDx
0.3 Nm (2.66 in-lb.)
IC755CxS10CDx
0.7 Nm (6 in-lb.)
IC755CxS12CDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb.)
IC755CxS15CDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb.)
5.5 VESA Arm Mounting
The QuickPanel
+
unit can be installed on a commercially available Video
Electronics Standards Association (VESA) MIS-D arm, stand, or apparatus
that complies with the UL1678 standard.
Note: Refer to the mounting arm manual for instructions.
To VESA mount the QuickPanel
+
unit: use the mounting holes located
on the back of the unit (refer to Figure 62 and Figure 63).
• The mounting holes for IC755CxS06RDx and IC755CxW07CDx attach
with M4 screws that are 6 mm (0.24 in) or less in length.
• The mounting holes for IC755CxSxxCDx attach with M4 screws that
are 8 mm (0.32 in) or less in length.
Torque Range for Mounting M4 Screws
Display Unit
Torque Range
IC755CxS06RDx
0.7 to 0.8 Nm (6.2 to 7.1 in-lb.)
IC755CxW07CDx
0.7 to 0.8 Nm (6.2 to 7.1 in-lb.)
IC755CxSxxCDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb.)

Emerson QuickPanel+ IC755C S12CD Series Specifications

General

Brand	Emerson
Model	QuickPanel+ IC755C S12CD Series
Category	Monitor
Language	English