Quick Panel Operator User Manual Section 3
GFK-2847AA Jan 2023
Software 18
3.4 Copy Project to SD Card
The custom utility Copy Project to SD Card transfers PAC Machine Edition
View and Control projects between compatible QuickPanel
+
units using
SD cards.
CAUTION
Before disconnecting power, verify that the copy or update operation is complete (no busy
message or wait cursor).
To copy a PAC Machine Edition project to an SD card
1.
Verify that there is a blank SD card in the SD card port.
2.
Double-tap the Copy Project to SD Card icon on the desktop.
3.
If the project is secured with an enhanced security password,
then the password authentication window will be displayed. The
user shall be able to proceed only when the password is
successfully authenticated.
4.
From the Copy Project Query confirmation window, tap Yes.
CAUTION
Copying a project while PAC Machine Edition runtimes are active may cause an incomplete
copy to be created if the runtimes are also writing to files in the project folders. If the utility
detects this situation, it will notify you to stop the runtimes before making the backup. You
will not be able to create a backup while the runtimes are writing files.
3.5 PAC Machine Edition Project Update
Update a PAC Machine Edition application that is currently stored on the
QuickPanel
+
unit with a revision stored on a flash device, such as an SD
card.
To update a Machine Edition project
1.
Insert the flash device containing an upgraded version of the PAC
Machine Edition project into the appropriate port.
2.
Restart the unit.
To Next Page
Loading...
Need help?
General
