Emerson QuickPanel+ IC755C S12CD Series User Manual

Quick Panel Operator User Manual Section 7
GFK-2847AA Jan 2023
Secomea Security (Optional) 86
Section 7: Secomea Security (Optional)
7.1 Secomea Configuration Tool
Note: The SiteManager™ and its related GateManager™, LinkManager™, and LinkManager™ Mobile
products are licensed, sold, and supported by Secomea and Secomea’s licensed distributors.
Additional information is available at www.secomea.com.
Secomea SiteManager software (also known as the Secomea
Configuration tool) is installed on QuickPanel
+
products. The Secomea
Configuration tool enables the user to configure and enable the
QuickPanel
+
device on the Secomea network.
Note: It is recommended that you have a Network Architect on-site and be working with the Secomea
team to enable this functionality.
To access the Secomea Configuration tool and enable the QuickPanel
+
on
the Secomea network
1. From the QuickPanel
+
Start menu, select Programs to display the
Secomea Configuration tool window.
2. Enable the QuickPanel
+
device on the Secomea network.
Figure 86: System Memory Slide Bar Display
Note: The Appliance Name can be any name but should be unique so that the Secomea network can
identify the device. Proxy Address allows the user to connect from their local network with firewall
enabled and blocking ports 80, 443, and 11444. The SiteManager will attempt to establish a
connection with and without proxy.

Emerson QuickPanel+ IC755C S12CD Series Specifications

General

Brand	Emerson
Model	QuickPanel+ IC755C S12CD Series
Category	Monitor
Language	English