Section 17: Upgrading the Operational
Firmware
219
The following message appears after the file is Unzipped:
Note - When the file is extracted, it expands to many times its original size and
will no longer fit on a floppy disk – keep this in mind if you need to move the
extracted file from one computer to another.
Once the file is extracted it changes from an .exe format to a .hex format that will
be named LegendZing1_0_X_X.hex, (again, the actual number will change
depending on revision level). It is the .hex format file that you will use to upgrade
your laser.
Keep track of the folder where you saved the extracted .hex file. You will need
to access this file again in the next step.
At this time it’s important to
know which folder you are
unzipping this file to.
If you are unsure, use the
Browse button to select a
folder where you know you
can retrieve this file later.
Click on the Unzip button.
Click the Okay button.
To Next Page
Loading...
Need help?
General