Epilog Laser Zing 10000 User Manual

15
Section 3: Getting Started
In This Section
 Setting Up Your Laser System
 Connecting The Exhaust
 Connecting The Electrical Power
 Laser Cooling Requirements And Operating Temperatures
Setting Up Your Laser System
Setting up your Epilog Laser System is easy to do! If you’ve ever installed a
paper printer on your computer, this is almost that easy. You will need to do the
following to use your machine:
 Remove it from the crate
 Connect the exhaust system to your laser
 Connect electrical power
 Connect the laser to your computer using a USB or Ethernet cable
 Install the Epilog Dashboard print driver onto your computer
You may need a contractor to install the exhaust. This must be done PRIOR to
installation of the laser system.
Time Saver: PLEASE DO NOT throw away the box and all packaging, you
may need it later. This will save considerable time trying to repackage the
machine for routing to different locations.

Epilog Laser Zing 10000 Specifications

General

Brand	Epilog Laser
Model	Zing 10000
Category	Measuring Instruments
Language	English