125
Air Filter and Vent Maintenance
Regular filter maintenance is important to maintaining your projector. Clean
You can remove the air filter so that you can clean both sides. Do
the air filer when a message appears telling you the temperature inside the
not rinse the air filter in water, or use any detergent or solvent to
a
projector has reached a high level. It is recommended that you clean these
clean it.
parts at least once every three months. Clean them more often than this if you
use the projector in a particularly dusty environment.
Attention
Do not use canned air. The gases may leave a flammable residue or push
Attention
dust and debris into the projector's optics or other sensitive areas.
If regular maintenance is not performed, your Epson projector will notify you
when the temperature inside the projector has reached a high level. Do not wait
until this warning appears to maintain your projector filter as prolonged exposure
c
If dust is difficult to remove or the air filter is damaged, replace the air
to high temperatures may reduce the life of your projector or lamp.
filter.
gg Related Links
• "Cleaning the Air Filter and Vents" p.125
Replacing the Air Filter
• "Replacing the Air Filter" p.125
You need to replace the air filter in the following situations:
Cleaning the Air Filter and Vents
• After cleaning the air filter, you see a message telling you to clean or replace
it
Clean the projector's air filter or vents if they get dusty, or if you see a
• The air filter is torn or damaged
message telling you to clean them.
You can replace the air filter while the projector is mounted to the ceiling or
placed on a table.
a
Turn off the projector and unplug the power cord.
a
Turn off the projector and unplug the power cord.
b
Gently remove the dust using a small vacuum designed for computers
or a very soft brush (such as a paintbrush).
To Next Page
Loading...
Need help?
General
