130
Projector Lamp Maintenance
h
Push in the lamp firmly and tighten the screws to secure it.
• Make sure the lamp cover is securely installed or the lamp will
not turn on.
a
• Do not replace the lamp cover with too much force and make
sure the lamp cover is not deformed.
Reset the lamp timer to zero to monitor the new lamp's usage.
gg Related Links
• "Replacement Parts" p.148
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the
lamp replacement message and to monitor lamp usage correctly.
Do not reset the lamp timer if you have not replaced the lamp to avoid
inaccurate lamp usage information.
a
i
Replace the lamp cover and tighten the screw to secure it.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Reset menu and press [Enter].
To Next Page
Loading...
Need help?
General
