Epson EB-X04 User Manual

146
Solving Network Problems
projector's network Mail menu or in the network software.
Check the solutions in these sections if you have problems using the projector
• Set the Standby Mode setting to Communication On in the projector's
on a network.
ECO menu so the network software can monitor the projector in standby
mode.
gg Related Links
• Make sure your electrical outlet or power source is functioning correctly.
• "Solutions When You Cannot Access the Projector Through the Web" p.146
• "Solutions When Network Alert E-Mails are not Received" p.146
gg Related Links
• "Solutions When the Image Contains Static During Network Projection"
• "Network Menu - Mail Menu" p.112
p.146
Solutions When the Image Contains Static During
Solutions When You Cannot Access the Projector
Network Projection
Through the Web
If the projected image contains static during network projection, try the
If you are unable to access the projector through a Web browser, make sure
following solutions:
you are using the correct ID and password.
• Check for any obstacles between the access point, the computer, the mobile
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
device, and the projector, and change their positions to improve
• For the password, enter the password set in the projector's network Basic
communication.
menu. The default password is admin.
• Make sure that the access point, the computer, the mobile device and the
• Make sure you have access to the network the projector is on.
projector are not too far apart. Move them closer together and try to
connect again.
The user ID and password are case sensitive.
• If the wireless connection is slow or your projected image contains noise,
a
check for interference from other equipment, such as a Bluetooth device or
microwave. Move the interfering device farther away or expand your
wireless bandwidth.
gg Related Links
• "Network Menu - Basic Menu" p.109
• Reduce the number of connected devices if the connection speed declines.
Solutions When Network Alert E-Mails are not
Received
If you do not receive an e-mail alerting you to problems with a projector over
the network, try the following solutions:
• Make sure the projector is turned on and connected to the network
correctly. (If an error shut down the projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the

Epson EB-X04 Specifications

General

Brand	Epson
Model	EB-X04
Category	Projector
Language	English