Turning On the Projector
28
When you connect the video equipment to the projector, turn on the video
equipment you want to use after you turn on the projector.
a
Connect the AC adapter to the projector's AC adapter port.
b
Connect the power cord to the AC adapter.
c
Plug the power cord into an electrical outlet.
The projector enters standby mode. This indicates that the projector is
receiving power, but is not yet turned on.
d
Press the power button on the control panel or remote control to turn
on the projector.
The status indicator flashes blue as the projector warms up. Once the
projector is warmed up, the status indicator stops flashing and turns
blue.
The first time you turn on the projector, the remote control pairing
screen and initial setup screen are displayed. Follow the on-screen
instructions to complete the settings.
Warning
• Never look into the projector lens when the light source is on. This can damage
your eyes and is especially dangerous for children.
• When turning on the projector at a distance using the remote control, make sure
there is no one looking into the lens.
• During projection, do not block the light from the projector with a book or other
objects. If the light from the projector is blocked, the area on which the light
shines becomes hot which could cause it to melt, burn, or start a fire. Also, the
lens may get hot due to the reflected light which could cause the projector to
malfunction. To stop projection, turn off the projector.
gg Related Links
• "AC Adapter Safety Instructions" p.28
• "Projector Feature Settings - Settings Menu" p.64
AC Adapter Safety Instructions
Follow these safety instructions when using the supplied AC adapter.
Warning
• Under the following conditions, unplug the projector from the outlet and refer
all repairs to qualified service personnel. Continuing to use under these
conditions may result in fire or electric shock.
• If smoke comes from the AC adapter.
• If strange odors or strange noises come from the AC adapter.
• If the AC adapter has been damaged.
• If liquid or foreign objects get inside the AC adapter.
To Next Page
Loading...
Need help?
General
