Using the Projector as a Bluetooth Speaker
49
You can use the projector's speaker to output audio from a video/audio device
connected by Bluetooth.
a
Press the button on the control panel or remote control to
enter Bluetooth Speaker Mode.
After switching to Bluetooth Speaker Mode, the following message is
displayed.
b
Enable the Bluetooth function on the device you want to connect and
select Projector from the available device list. See the documentation
supplied with the device for more information.
a
• When you want to enjoy the sound only from the projector,
you can temporarily turn off the projected image by pressing
the button on the control panel or remote control.
• To cancel a Bluetooth connection, disconnect from the
connected device.
c
To exit Bluetooth Speaker Mode, press again.
After exiting Bluetooth Speaker Mode, the following message is
displayed.
a
• There is a delay in the audio output from any Bluetooth audio device.
• You cannot connect multiple video/audio devices by Bluetooth at the
same time.
• You can also connect the projector to Bluetooth audio devices, such
as speakers or headphones, to output the projector's audio from these
devices. Perform pairing by selecting Device Preferences from at
the top right of the Android TV
™
home screen.
• Bluetooth audio devices are not supported in some countries and
regions.
gg Related Links
• "Bluetooth Specifications" p.49
Bluetooth Specifications
Version Bluetooth Ver. 5.0
Supported profiles A2DP, AVRCP, HID, HOGP
Frequency used 2.4 GHz band (2.402 to 2.480 GHz)
To Next Page
Loading...
Need help?
General
