Projector Indicator Status
74
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
a
If the indicators display a pattern not listed in the table below, turn the
projector off, unplug it, and contact Epson for help.
A
Status indicator
Projector status
Indicator status Problem and solutions
Lit blue Normal operation.
Indicator status Problem and solutions
Flashing blue Warming up, shutting down, or initializing the
projector.
Remote control operations may be disabled when the
indicator is flashing blue.
Off Standby or sleep mode.
When you press the power button, projection starts.
Lit orange Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
• Make sure the environmental temperature is not too
hot.
• Clean or replace the air filter.
• If the problem persists, unplug the projector and
contact Epson for help.
Laser warning.
Turn the projector off, unplug it, and contact Epson for
help.
Flashing orange Laser has a problem.
Turn the projector off, unplug it, and contact Epson for
help.
A fan or sensor has a problem.
Turn the projector off, unplug it, and contact Epson for
help.
Internal projector error.
Turn the projector off, unplug it, and contact Epson for
help.
gg Related Links
• "Projector Feature Settings - Settings Menu" p.64
• "Cleaning the Air Filter and Vents" p.69
• "Replacing the Air Filter" p.69
To Next Page
Loading...
Need help?
General
