Basic Operations
32
Adjusting the Volume
You can adjust the volume by using the volume buttons on the remote control or on the control panel.
Remote control Control panel
c
•
You can also adjust the volume from the Configuration menu. s Settings - Sound - Volume p.52
•
When an AV System is connected to the projector and you want to adjust the volume for the AV system,
set HDMI Link to On and Audio Out Device to AV System.
s Settings - HDMI Link p.52
•
If you have used the remote control for Android TV
TM
to mute the volume on the Android TV
TM
, you
will not be able to turn it up using the projector remote control. Increase the volume using the remote
control for Android TV
TM
before you make adjustments.
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can power on and then gradually increase the volume.
Hiding the Image and Muting the Audio Temporarily (A/V Mute)
You can temporarily stop projection and mute any sound by pressing the A/V Mute button on the remote
control or by closing the lens cover. To turn the image and sound back on, press the button again or open
the lens cover.
Remote control Main unit
c
•
For movies, the image and audio continue to play even during A/V Mute. You cannot resume projection
from the point that you muted the video and audio using the A/V mute button.
•
When outputting audio from an AV system and you want to adjust the volume for the AV system, set
HDMI Link to On and Audio Out Device to AV System.
s Settings - HDMI Link p.52
To Next Page
Loading...
Need help?
General
