Configuration Menu
50
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the Image or Signal in the
Configuration menu. Note that the items displayed for the Image, Signal, and Info vary depending on the
image signal being projected.
Image menu
Function Menu/Settings Explanation
Color Mode
Dynamic, Bright Cinema, Natural, Cinema Select a color mode based on your sur-
roundings and the image you are projec-
ting.
s p.33
Brightness
Adjusts the brightness when the image
appears too dark.
Contrast
Adjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Color Satura-
tion
Adjusts the color saturation for the im-
ages.
Tint
Adjusts the tint for the images.
Sharpness
Adjusts the image sharpness.
White Balance
Color Temp. Adjusts the overall color of the image. The
image is tinted blue for high values, and
tinted red for low values.
Custom
Adjusts the offset and gain for each R, G,
and B color.
Frame Interpo-
lation
Off, Low, Normal, High Adjusts the smoothness of the movement
of the image.
Image En-
hancement
Image Preset Mode Off, Preset 1 to Preset 5 Select the settings prepared in advance as
the settings for Noise Reduction, MPEG
Noise Reduction, and Detail Enhance-
ment.
Noise Reduction
Adjusts the roughness of the image.
MPEG Noise Reduction
Smoothes out rough images in MPEG for-
mat.
Detail Enhancement Strength, Range Creates a more emphatic texture and ma-
terial feel of the image.
Advanced
Gamma 2, 1, 0, -1, -2, Dark Gam-
ma Uplift, Custom
*
, Re-
set
Performs gamma adjustments. You can
select a raw value or adjust using a custom
value.
s p.40
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Adjusts the Hue, Saturation, and Bright-
ness for each R, G, B, C, M, and Y col-
or.
s p.39
To Next Page
Loading...
Need help?
General
