176
Selecting Password Security Types
After setting a password, you see this menu, allowing you to select the password security types you want
to use.
If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or
until the menu appears.
• To prevent unauthorized use of the projector, select Power On Protection, press Enter, select On,
press Enter again, and press Esc.
• To prevent changes to certain projector settings, select Menu Protection, press Enter, and do the
following as necessary:
• To prevent changes to the User's Logo screen or related display settings, select User's Logo, press
Enter, select On, press Enter again, and press Esc.
• To prevent changes to the projector's time or schedule settings, select Schedule, press Enter,
select On, press Enter again, and press Esc.
• To prevent changes to network settings, select Network, press Enter, select On, press Enter
again, and press Esc.
You can attach the Password Protect sticker to the projector as an additional theft deterrent.
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic: Password Security Types
To Next Page
Loading...
Need help?
General