44
2. Connect the USB cable (or USB flash drive) to one of the projector's USB-A ports.
Note: Use the USB cable supplied with or specified for use with your device. Do not connect a USB
hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slide Show
Starting a PC Free Movie Presentation
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to one of the ports. To display the
connected USB device, select the USB1 source.
Note: If you have connected a document camera using a USB cable, select the USB2 source.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB or Source Search button on the remote control and select the USB1 or USB2
source.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slide Show
Starting a PC Free Movie Presentation
To Next Page
Loading...
Need help?
General