Epson SC-P600 series User Manual

Loading and Removing
Roll Paper
Loading Roll Paper
Use the roll paper holder supplied to load roll paper into
the rear of the printer. See the following for information
on supported roll paper types.
U “Supported Media” on page 111
A
Turn on the printer.
B
Open the front cover.
Note:
If the front manual feed tray is open, push the
center of the tray to close it.
C
Fully extend the output tray.
D
After confirming that the end of the roll paper is
cut straight across, insert the roll paper holder
into the ends of the roll.
If the end of the roll paper is not cut straight
across, trim it straight before proceeding.
E
Open the rear support.
Only open the support; there is no need to extend
it.
SC-P600 Series User’s Guide
Basic Operations
27

Epson SC-P600 series Specifications

General

Brand	Epson
Model	SC-P600 series
Category	Printer
Language	English