EVS XT nano Configuration Manual

Issue
10.04.A
XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
6
2.2.4 CLIP MANAGEMENT
You can also define most of the Clip management settings on pages 3.1 to 3.3 of
the setup menu on the Remote Panel. You will find a description of these settings
in the Multicam user manual.
DEFAULT COPY/MOVE
Possible value: GbE
The Default Copy/Move parameter allows specifying whether the copy operations
should be executed preferably using the SDTI or the HCTX GigE network.
Since only the GigE network is available on XTnano servers, the value for this
parameter is forced to GbE.
AUTONAME CLIP
Possible values: Disable (default) / TC IN / Cam Name / ID Louth / VarID 32
If this function is enabled, the value of the selected field will automatically be
used to name the clip upon creation.
The values from the following fields can be used to automatically name clips:
Value Meaning
Disable
No name is assigned to a clip when it is created. Default value.
TC IN
The timecode of the IN point of the clip is automatically assigned to
a clip when it is created.
Cam
Name
The name of the recorder channel is automatically assigned to a
clip when it is created.
ID Louth
The ID Louth of the clip, that is a unique identifier for the clip, is
assigned to a clip when it is created (used mostly with an XNet
network not available with XTnano).
VarID 32
The VarID 32 of the clip is assigned to a clip when it is created.
When this option is selected, the VarID 32 used to assign a name to
the clip will be limited to the first 8 characters of this field.
DATE FORMAT
Read-only value: dd/mm/yy
This is the date format used for the dates in searches or in clip information
display. This parameter is read-only and provided for information purpose.

EVS XT nano Specifications

General

Brand	EVS
Model	XT nano
Category	Server
Language	English