EVS XT nano Configuration Manual

XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
15
2.4 SMPTE 334M PACKETS MANAGEMENT
(PAGE 3)
In Multicam, ancillary data packet in the vertical ancillary data space in HD and
SD signals are supported, as defined in the SMPTE standards 334M, 291M (type 2
ANC packet).
ACTIVATE / DEACTIVATE VANC DATA PACKET SUPPORT
In the Setup Configuration module (SHIFT + F2), press PAGE DOWN until you
access the SMPTE 334M Packet Management section.
You can turn on/off the SMPTE 334M packet decoding for each record channel.
You can turn on/off the SMPTE 334M packet encoding for each player channel.
PACKETS SUPPORTED
Up to now, SMPTE 334M data packets carried on the chrominance (C) data stream
within the SMPTE 292M signal are not decoded (HD).
In Multicam, all DIDs mentioned in the SMPTE 334M standards are supported:
• 61 Î 62
• 40 Î 5F
• C0 Î DF
Those DIDs are saved and restored on the output channels on their original lines.

EVS XT nano Specifications

General

Brand	EVS
Model	XT nano
Category	Server
Language	English