To Next Page

To Previous Page

XTnano – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

3.10 PLAYLIST SETTINGS

Playlist p.4.1

[F1]Video effect duration : 00s10fr

[F3]Wipe type : Vert. L>R

[F4]Default plst speed : Unk.

[F5]Insert in playlist : After

[F6]Confirm Ins/del clips : No

[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn

3.10.1 VIDEO EFFECT DURATION

Possible range: 0s00fr to 20s00fr. Default: 00s10fr

This parameter sets the duration of the video transition effect. The specified

value is used as default value in Playlist Edit mode. Note that the duration of the

video transition when using the TAKE button in 1Pgm+Prv mode has its own

parameter in another section of the Setup menu.

3.10.2 WIPE TYPE

Possible values: Vert. L>R (default) / Vert. R>L

This parameter specifies the vertical wipe effects from Left to Right or from Right

to Left.

3.10.3 DEFAULT PLST SPEED

Possible values: Unk. (unknown - default), or from 0% to 100%

This defines the default speed used for clips entered into playlist. “Unknown”

means that the speed of the previous clip in the playlist will be used as a

reference for the current clip. 0% will force the playlist to pause at the end of the

previous clip.

3.10.4 INSERT IN PLAYLIST

Possible values: After (default) / Before

This setting defines how the Insert function of playlist will be performed:

depending on the value specified in this setting, the new clip will be inserted after

or before the current clip in the playlist.

EVS XT nano Configuration Manual

Other manuals for EVS XT nano