EVS XT nano Configuration Manual

Issue
10.04.A
XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
40
3.9.8 RECEIVE PAGE
Possible values: Select one or more clip pages from 1 to 10. Default: p.5
This parameter specifies the page of your machine where clips sent to you by
other network operators using the PUSH function must be stored.
How to Specify PUSH Receive Page(s)
To specify the page(s) to which the clips pushed from another network operator
will be stored, proceed as follows:
1.
In the 2
nd
page of Clip parameters, press the F5 key to edit the PUSH
Receive Page parameter.
2.
Press the F_ key corresponding to the page number you want to
select/unselect as PUSH Receive Page.
The selected pages will be highlighted on the LCD and the corresponding
F_ keys light red. F_ keys of unselected pages light green.
3.
Press ENTER to validate your selection.
Clips p.3.4
[F1]PLST receive Pg: 1 2 3 4 5 6 7 8 9 0
0
[F6]Reset Archive Status
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.9.9 PLST RECEIVE PG
Possible values: Select one or more clip pages from 1 to 10, default: page 10 (0).
This function allows the operator to automatically create a copy of all clips when
copying a playlist. In this setting, you need to select the page(s) of your machine
where clips received when using the PLST+CLIPS copy function must be stored.
Refer to the description of the Playlist copy function for details. Clip pages can be
assigned simultaneously as PUSH and PLST Receive Pages.
3.9.10 RESET ARCHIVE STATUS
Pressing F6 will reset the archive status of all clips present on the system. A
confirmation is required. Refer to the description of the Archive function for
details.

EVS XT nano Specifications

General

Brand	EVS
Model	XT nano
Category	Server
Language	English