EVS XT nano Configuration Manual

XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
21
2.6 HCTX GIGABIT CONNECTION SETTINGS
(PAGE 6)
2.6.1 INTRODUCTION
In the Setup Configuration module (SHIFT + F2), press the PAGE DOWN key until
you access the page 6. It displays the connection parameters for the HCTX board
and the MTPC board.
The XTnano servers support a Gigabit Ethernet connection. It allows the backup
of the audio and video data.
The Gigabit connection is provided via the HCTX board. Its backplane is equipped
with two Gigabit Ethernet ports. The settings need to be defined on at least one
port for the server to be able to operate the Ethernet connection.
When the Gigabit module is not present on the HCTX board, the first line of the
HCTX Gigabit connection settings will display the message !Not detected!

EVS XT nano Specifications

General

Brand	EVS
Model	XT nano
Category	Server
Language	English