To Next Page

To Previous Page

XTnano – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

TIMECODE TYPES AVAILABLE ON A RECORDER

The settings related to the timecode jump tables are specified on the first page of

the Setup screen (accessed via SHIFT + F2).

The operators can use two types of timecodes to work with the video material

stored by a given recorder on a server:

• The LTC timecodes are automatically stored in the first timecode jump table

called the ‘LTC table’. This is specified in the LTC field, which is not editable.

• The second type of timecodes has to be specified by the user in the USER

field. It will be stored in the second timecode jump table, the ‘USER TC table’.

The users can specify one of the following timecode types in the USER setting:

• LTC and VITC timecodes in SD

• LTC, HANC LTC and HANC VITC in HD

The user will have the possibility to work with one of the timecode types defined

for the recorder. Usually, an LTC timecode is used to perform operations on live

events. A VITC timecode is used for video material ingested from tapes as it is

the timecode embedded in the video signal.

TIMECODE TYPES USED ON A RECORDER

On the first page of the VGA Setup screen, the Prim.TC field (Primary TC)

specifies which timecode type will be displayed at the bottom the VGA and will be

used to work with the video material stored on the given recorder.

Possible Values

The values can be the following:

• LTC

LTC timecode, which is automatically stored in the LTC table. It is

specified in the LTC field

• USER

User-defined timecode, which is stored in the USER TC table and

specified in the USER field.

EVS XT nano Configuration Manual

Other manuals for EVS XT nano