To Next Page

To Previous Page

XTnano – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

EVS Controller p.6.2

[F1]Record key : Start REC + Live

[F3]VGA & RMT Sync : No

[F4]PGM/PRV Mode : Enable

[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn

3.12.7 RECORD KEY

Possible values: Start REC + Live (default) / Live

This parameter changes the function of the RECORD key on the remote:

• Start REC + Live: Pressing the RECORD key starts the record process and

switches to LIVE mode.

• Live: Pressing the RECORD key only switches to last recorded picture, but the

record is not restarted if it has been previously stopped by the operator.

3.12.8 VGA & RMT SYNC

Possible values: No, Yes

This parameter selects whether the current clips machine, page and bank of VGA

screens and EVS Remote Panel must be synchronized.

Value Meaning

No (Default)

Clip machine, page and bank can be selected independently on

the VGA screen and on the EVS Remote Panel.

Yes

Clip machine, page and bank are synchronized between VGA

screen and EVS Remote Panel. Connecting to the clips of a

network machine or coming back to the clips of the local

machine, or selecting a new page or bank on one side will be

automatically reflected on the other.

3.12.9 PGM/PRV MODE

Possible values: Enable (default) / Disable

When this setting is enabled, the user has the possibility to select the PGM/PRV

mode on the LCD display as a function accessible from the A button on the

Remote main menu. Otherwise, the PGM/PRV mode selection is not accessible

from the A button.

EVS XT nano Configuration Manual

Other manuals for EVS XT nano