Fastech Ezi-Step Plus-R User Manual

- 29 -
29
Communication Protocols
1－ 3． Program Method
There are 2 method of programming for Ezi -STEP Plus-R.
The first is generally used method with using Visual C++ language under window system of PC.
Library that serviced together with Ezi -STEP Plus-R have to be used. Please refer to
「2. Library for PC Program 」
The second method is sending command ( characters) directly to Ezi-STEP Plus-R. User has to prepare
low-level protocol programming like ‘Protocol Test’ program and this method is applied when use
higher-level control unit as like PLC.
For more programming method details, please exercise ‘ProtocolTest_PlusR.exe ’ is serviced together
with GUI.
Please refer to 「3. Protocol for PLC Program 」.

Fastech Ezi-Step Plus-R Specifications

General

Brand	Fastech
Model	Ezi-Step Plus-R
Category	Controller
Language	English