Annotating images17
17.5 Adding a sketch
17.5.1 General
You can add a freehand drawing to an image.
17.5.2 Procedure
Follow this procedure:
1. Open the image in the image archive.
2. Push the navigation pad to display the top toolbar.
3. On the top toolbar, select the
icon and push the navigation pad.
4. On the right toolbar, select the
icon and push the navigation pad.
5. You are now in sketch mode. Draw the sketch by touching the screen.
6. (Optional step.) Push the navigation pad. This displays a context menu. Do one or
more of the following:
• To change the color of the sketch tools, select
(Draw) and push the navigation
pad. Select the color and push the navigation pad.
• To erase, select
(Eraser) and push the navigation pad. Erase parts of the sketch
by touching the screen.
• To add an arrow, circle, or cross, select
(Stamp sketch) and push the navigation
pad. Select the type of stamp and push the navigation pad. The stamp is displayed
in the center of the screen. You can move the stamp by using the navigation pad or
by touching the screen. When completed, push the navigation pad.
• To clear, select
(Clear all) and push the navigation pad.
• When the sketch is completed, select
(Save) and push the navigation pad.
#T810190; r. AI/41890/41890; en-US
88
To Next Page
Loading...
Need help?
General
