FLIR E95 User Manual

Working with measurement tools15
3. To move the spot, do the following:
3.1. Select
(Move spot) and push the navigation pad.
3.2. Push the navigation pad up/down and left/right to move the spot.
4. To center the spot, select
Center spot and push the navigation pad.
5. When completed, push the navigation pad and select
(Done).
6. Push the navigation pad to confirm and exit the menu mode.
15.4.3 Moving and resizing a box or circle tool
Note You can also move and resize the measurement tool by touching the screen.
Follow this procedure:
1. To select the measurement tool, touch the tool on the screen. The tool is now dis-
played with one or more handles.
2. Push the navigation pad—or touch and hold the tool. This displays a context menu.
3. Select
(Move/resize) and push the navigation pad. This displays a submenu.
4. Use the navigation pad to select one of the following:
• Select
(Resize) to change the size of the tool.
• Select
(Move) to move the tool.
• Select
(Center box/circle) to center the box or circle tool.
5. Push the navigation pad up/down and left/right to resize or move the tool.
6. When completed, push the navigation pad and select
(Done).
7. Push the navigation pad to confirm and exit the menu mode.
15.5 Changing the measurement parameters
15.5.1 General
For accurate measurements, it is important to set the measurement parameters.
Note During normal operation there is typically no need to change the default measure-
ment parameters, see section 15.5.3 Recommended values, page 72.
15.5.2 Types of parameters
The camera can use these measurement parameters:
• External IR window compensation, i.e., the temperature of any protective windows, ex-
ternal lenses (e.g., the close-up lens), etc., that are set up between the camera and the
object of interest. If no protective window, protective shield, or external lens is used, this
value is irrelevant and should be left inactive.
• Object distance, i.e., the distance between the camera and the object of interest.
#T810190; r. AI/41890/41890; en-US
71

FLIR E95 Specifications

General

Brand	FLIR
Model	E95
Category	Thermal cameras
Language	English