EasyManuals Logo

Ford Explorer 2011 User Manual

Ford Explorer 2011
448 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #280 background imageLoading...
Page #280 background image
The AdvanceTrac with RSC
system includes a traction control
off selection in the message center.
The stability control light and stability control off light in the instrument
cluster will illuminate temporarily during start-up as part of a normal
system self-check, or during driving if a driving situation causes the
AdvanceTrac with RSC system to operate. If the stability control light
and stability control off light remain steadily illuminated, have the system
serviced by an authorized dealer immediately. The message center will
also indicate a failure with the brake system.
When AdvanceTrac with RSC performs a normal system self-check,
some drivers may notice a slight movement of the brake, and/or a
rumble, grunting, or grinding noise after startup and when driving off.
When an event occurs that activates AdvanceTrac with RSC you may
experience the following:
A deceleration of the vehicle
The stability control light will flash.
A vibration in the pedal when your foot is on the brake pedal
If the driving condition is severe and your foot is not on the brake, the
brake pedal may move as the systems applies higher brake forces. You
may also hear a whoosh of air from under the instrument panel during
this severe condition.
The brake pedal may feel stiffer than usual.
Engine power may be reduced.
Traction control system (TCS)
The traction control system is a driver aid feature that helps your vehicle
maintain traction of the wheels, typically when driving on slippery and/or
hilly road surfaces, by detecting and controlling wheel spin.
Excessive wheel spin is controlled in two ways, which may work
separately or in tandem: engine traction control and brake traction
control. Engine traction control works to limit drive-wheel spin by
momentarily reducing engine power. Brake traction control works to limit
wheel spin by momentarily applying the brakes to the wheel that is
slipping. Traction control is most active at low speeds.
During TCS events, the stability control light in the instrument cluster
will flash.
If the TCS is activated excessively in a short period of time, the braking
portion of the system may become temporarily disabled to allow the
Driving
280
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ford Explorer 2011 and is the answer not in the manual?

Ford Explorer 2011 Specifications

General IconGeneral
BrandFord
ModelExplorer 2011
CategoryAutomobile
LanguageEnglish

Related product manuals