If and when
V
ehicle tool kit
Introduction
When securing the vehicle in the event of
a breakdown, observe the legal require-
ments in the respective country.
WARNING
In the event of sudden driving or braking
manoeuvres or an a
ccident, a loose vehi-
cle toolkit, breakdown set or spare wheel
could be flung though the vehicle and
cause severe injuries.
·
Always ensure that the vehicle toolkit,
breakdown set and spare wheel are
properly secured in the vehicle.
WARNING
Unsuitable or damaged tools in the vehi-
cle toolkit c
an lead to accidents and inju-
ries.
·
Never work with unsuitable or dam-
aged tools from the vehicle toolkit.
Stowage
Please refer to at the start of the
chapt
er on page 293.
The vehicle toolkit and the removable ball
coupling for the towing bracket may be lo-
cated in dierent places depending on the
vehicle model.
Vehicle toolkit
The vehicle toolkit is located in the luggage
compartment on the right behind a cover. It
may be necessary to undo a securing strap.
Removable ball head
The removable ball head is located in
a foam part under the front passenger seat.
Contents of the vehicle toolkit
Please refer to at the start of the
chapt
er on page 293.
The scope of the on-board tool kit depends
on the country and equipment. In some
countries, there may also be a tyre pressure
gauge in the vehicle. The following section
describes the maximum scope:
Fig. 167 C
ontents of the toolbox (illustra-
tion).
1
Screwdriver with hexagon socket in the
handle for unscrewing or screwing tight
sla
ckened wheel bolts. The screwdriver
has two reversible blades.
2
Adapter for the anti-the wheel bolt.
C
arry the wheel bolt adapter in the ve-
hicle toolkit at all times. The code
number of the anti-the wheel bolt is
stamped on the front of the adapter.
You will need this number to replace
the adapter if lost. Make a note of the
code number for the anti-the wheel
bolt and keep it in a safe place – but
not inside the vehicle.
3
Screw-in towing eye.
4
Hook for pulling o the c
entre covers,
wheel covers and the wheel bolt caps.
5
Jack. Before you return the vehicle jack
to the toolbox, fully wind in the ja
ck.
6
Box spanner for wheel bolts.
7
Crank.
8
Tool for removing tail light clusters.
Vehicle tool kit 293
2KF012720AB