Setting the speed warning in the ana-
logue instrument cluster
1. Vehicles with multifunction steering
wheel:
Select the display Warning at --- km/h
or Warning at --- mph.
2. Press the button on the multifunc-
tion steering wheel to sa
ve the current
speed and activate the warning.
3. Set the speed within approximately
5 seconds using the
and buttons
on the multifunc
tion steering wheel.
4. Press the
button on the multifunc-
tion steering wheel or wait for a few
sec
onds.
The speed is now saved and the warn-
ing is activated.
5. To deactivate, press the
button on
the multifunc
tion steering wheel again.
The stored speed will be deleted.
1. Vehicles without multifunction steering
wheel:
Select the display Warning at --- km/h
or Warning at --- mph.
2. Press the
button on the wiper
lever to sa
ve the current speed and ac-
tivate the warning.
3. Within approximately 5 seconds, set
the speed using the rocker switch
on the wiper lever.
4
. Press the
button on the wiper
lever a
gain or wait for a few seconds.
The speed is now saved and the warn-
ing is activated.
5. To deactivate, press the
button
on the wiper lever a
gain.
The stored speed will be deleted.
The warning can be set for speeds from
30 km/h (18 mph) to 250 km/h (155 mph).
In some markets, a single acoustic warning
is given at speeds above 80 km/h (approx.
50 mph) and a continuous warning tone
sounds above 120 km/h (approx. 75 mph).
This warning is a legal requirement and
cannot be changed.
Selecting displays in the analogue in-
s
trument cluster
You can select which driving data you want
to display in the vehicle settings in the Info-
tainment system → page 34.
Average speed displ
ay
The average speed is displayed aer
around 100 m (around 328 ). The display
will show dashes until this point.
Consumption displ
ay
The average fuel consumption is displayed
aer around 300 m (around 984 ). The
display will show dashes until this point.
Fuel range display
Approximate calculation of the distance
that the vehicle can still travel in km
(miles) if the same driving style is main-
tained.
SCR range or Range
display
Approxima
te calculation of the distance in
km (miles) that the vehicle can still travel
with the current AdBlue® level if the same
driving style is maintained. Depending on
the equipment, the display only appears
when the distance to empty is around
2,000 km (around 1,243 miles) or 2,400 km
(around 1,491 miles) and cannot be dese-
lected.
Convenience consumers
List of active convenience systems which
can increase energy consumption, e.g. the
Climate Control.
The display shows the guide values of the
respective consumer.
Service
Service menu
S
ettings can be made in the Service menu
depending on the vehicle equipment.
Opening the Service menu in the ana-
logue instrument cluster
1. Select the Range information profile on
the analogue instrument cluster
→ page 28.
Service
31
2KF012720AB
To Next Page
Loading...
Need help?
General
