EasyManuals Logo
Home>Ford>Automobile>TOURNEO CONNECT

Ford TOURNEO CONNECT User Manual

Ford TOURNEO CONNECT
437 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #297 background imageLoading...
Page #297 background image
Changing the windscreen wiper blades
Fig. 169 On the windscreen: changing the
windscreen wiper bla
des
1
Release button.
1. Move the wiper arms to the service po-
sition before liing.
2.
When liing a wiper arm, hold it only in
the area of the wiper blade mounting.
3. Press and hold the release button and
simultaneously pull o the wiper blade
in the direction of the arrow
Fig. 169
1 .
4
. Insert a new wiper blade with the same
length and design onto the wiper arm.
Push it on until it engages.
5. Place the wiper arms carefully back on-
to the windscreen.
Changing the wiper blade for the rear
window
Fig. 170 T
he rear of the vehicle: changing the
rear window wiper blade
1
Release button.
1. When liing a wiper arm, hold it onl
y in
the area of the wiper blade mounting.
2. Li and fold back the wiper arm.
3. Press and hold the release button
Fig. 170
1 .
4
. Tilt the wiper blade in the direction of
the wiper arm Fig. 170
A and pull it
o in the direc
tion of the arrow
B at the
same time. Y
ou may need to use some
force to do this.
5. Insert a new wiper blade with the same
length and design onto the wiper arm
in the opposite direction of the arrow
Fig. 170
B and push it on until it en-
ga
ges. The wiper blade must be in fol-
ded-down position to do this
A .
6
. Carefully place the wiper arm back onto
the rear window.
WARNING
Worn or dirty wiper blades reduce visibility
and increa
se the risk of accidents and se-
vere injuries.
·
Always change wiper blades if they are
damaged or worn and no longer clean
the windscreen properly.
NOTICE
Damaged or dirty wipers can scratch the
windscreen.
·
Do not use any detergents c
ontaining
solvents, hard sponges or other sharp
objects, as they can damage the graphite
coating of the wiper blades during clean-
ing.
·
Do not use nail varnish remover, paint
thinner or similar products to clean the
windows.
Changing lights
Introduction
Before changing bulb
s, check whether
a bulb or LED light unit has failed. It is nor-
mally possible for you to change bulbs
yourself. If the exterior lighting is realised in
LED technology depending on the vehicle
Changing lights
295
2KF012720AB

Table of Contents

Other manuals for Ford TOURNEO CONNECT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ford TOURNEO CONNECT and is the answer not in the manual?

Ford TOURNEO CONNECT Specifications

General IconGeneral
BrandFord
ModelTOURNEO CONNECT
CategoryAutomobile
LanguageEnglish

Related product manuals