Output Format
135
Copy
3
Annotations (Adding a Comment/a Date/Page Numbers to Copies)
This feature allows you to add a comment, date, and page numbers onto copies.
You can select a comment, date, and page numbers, and their print positions from preset
formats.
Important • When you select this feature, if the number of pages scanned by the machine exceeds the
maximum, the machine will not print the already-scanned data. In that case, follow the instructions
of the message displayed on the screen to cancel the job. The maximum number of pages that the
machine can scan is 999 pages per job.
Note • The setting in [Reduce/Enlarge] does not affect the annotation image and text sizes.
• If you specify a comment, date, and page numbers together, make sure that their print positions do
not overlap before making copies.
• When [Pages per Side] is set, an annotation is added to the combined image.
• When [Repeat Image] or [Booklet Creation] is set, an annotation is added to each copy image.
• If a layout template is specified in [Apply Layout Template to Copy/Print Jobs] under [Force
Annotation] in the System Administration mode, the comment, date, and page number specified
here are overlapped with the text on the layout template when printed. For information on [Force
Annotation], refer to "5 Tools" > "Common Service Settings" > "Force Annotation" in the
Administrator Guide.
1 Select [Annotations].
2 Select any option.
îš„ Comment
Displays the [Comment] screen.
Refer to "[Comment] Screen" (P.136).
îš„ Date
Displays the [Date] screen.
Refer to "[Date] Screen" (P.137).
îš„ Page Numbers
Displays the [Page Numbers] screen.
Refer to "[Page Numbers] Screen" (P.137).
îš„ Bates Stamp
Displays the [Bates Stamp] screen.
Refer to "[Bates Stamp] Screen" (P.140).
To Next Page
Loading...
Need help?
General
