5 Scan
280
Scan
5
1 Press a one touch button. Confirm that the
recipient (e-mail address) specified with the
one touch button is displayed on the touch
screen.
Important • The one touch buttons have a sensor to
detect which page of one touch buttons (1 -
24, 25 - 48, or 49 - M02) is currently open.
Before pressing a one touch button, turn over
the one touch panel completely, and take off
your hand from the panel. Do not press the
button while you are turning over the panel.
• Do not place any objects near the one touch
buttons, nor spill any liquid over them.
Note • Turn the one touch panel over to press the
one touch buttons 25 and above.
• To re-enter the value, select the recipient (e-mail address) displayed on the touch screen and select
[Remove] on the pop-up menu.
New Recipient (Entering an Address)
You can enter e-mail addresses using the keyboard.
Note • [New Recipient] is not displayed depending on the settings in the System Administration mode or
the number of registered recipients. For details on the settings and the number of registered
recipients, ask your system administrator.
1 Select [New Recipient].
2
Use the keyboard displayed on the screen to
enter an e-mail address with up to 128
characters.
îš„ To/Cc/Bcc
Allows you to switch the recipient type (To/Cc/Bcc) from the drop-down menu.
îš„ + Add
Allows you to add e-mail addresses to send e-mails to multiple recipients (Broadcast).
îš„ Delete Text
Deletes all the entered e-mail addresses.
îš„ Backspace
Moves the cursor back to delete one character.
To Next Page
Loading...
Need help?
General
